Calculate Materials

Paver calculator

Work out how many pavers a patio, walkway or driveway takes, plus the base and bedding sand that go underneath.

Paver calculator

Shape of the area
ft
ft
%

Enter your measurements to see what to order.

One 4 in x 8 in paver covers 0.22 square feet, which is 4.5 per square foot.

How to work out how many pavers you need

  1. Measure the area in feet and multiply length by width.
  2. Add 10 percent for cuts. Covers cuts at edges and around curves, plus breakage. Herringbone cuts more than a running bond.
  3. Divide by what one 4 in x 8 in paver covers, and round up. Suppliers do not sell part units.

How many many pavers for a given area

Area4 in x 8 in paver12 in x 12 in patio stone16 in x 16 in patio stone
100 sq ft49511062
200 sq ft990220124
400 sq ft1,980440248
800 sq ft3,960880495
1,200 sq ft5,9401,320743

Every figure includes the 10 percent overage and is this page's own calculator, not a separate table that can drift from it.

What one 4 in x 8 in paver covers

FormatCoversPer sq ftWhere
4 in x 8 in paver0.22 sq ft4.5US
12 in x 12 in patio stone1 sq ft1US
16 in x 16 in patio stone1.78 sq ft0.56US

Why the figures differ between suppliers

A 4 by 8 inch Holland paver covers 32 square inches, which is 4.5 to the square foot. Producers publish units per pallet rather than units per square foot, and the three read give three different pallet counts, so order by area and check the pallet size your supplier ships.

What goes underneath

Paver sits on layers that are ordered separately and by volume, not by the piece. Running short on the base is the failure that shows two winters later.

How much extra to order

10 percent. Covers cuts at edges and around curves, plus breakage. Herringbone cuts more than a running bond.